FREE STANDARD SHIPPING ON ALL PRODUCTS WITHIN THE 48 STATES.
Couldn't load pickup availability
PDI Sanicloth Super Germicidal Wipes are an EPA-registered hospital-grade disinfectant formulated with a high-alcohol (55%) formula for use on hard, non-porous environmental surfaces in healthcare settings. The distinctive hexagonal-embossed material contains 40% wood-based fibers for a more cloth-like feel, is highly absorbent with better fluid capacity, and is more pliable than standard wipes for getting into crevices and hard corners of equipment. Pre-saturated with the correct amount of germicidal solution, they eliminate the need for mixing or measuring. Tested effective against 26 microorganisms including Influenza A (H1N1), TB, and MRSA on pre-cleaned environmental surfaces. Natural, latex-free, bleach-free, and phenolic-free. Two-year shelf life from date of manufacture. Meets CDC and OSHA guidelines.
PDI Sanicloth Super wipes are an excellent choice for hospitals, outpatient clinics, surgical centers, and long-term care facilities that require a higher-alcohol, broader-spectrum germicidal wipe for disinfection of medical equipment, high-touch surfaces, and hard-to-reach areas where a standard low-alcohol wipe may not provide sufficient efficacy. They are well-suited for infection control programs that need documented compliance with CDC and OSHA disinfection guidelines and require a wipe effective against a wider range of pathogens including TB. The cloth-like hexagonal-embossed material makes them particularly effective for wiping down complex equipment surfaces with crevices and corners where standard flat wipes may not make adequate contact. Any healthcare facility that needs a step up from standard germicidal wipes in terms of alcohol content, absorbency, and pathogen coverage will find PDI Sanicloth Super a trusted and clinically proven choice.
What is the difference between Sanicloth Super and Sanicloth Plus Classic?
Sanicloth Super contains a higher alcohol concentration (55%) compared to Sanicloth Plus Classic (14.85%), and is tested effective against 26 microorganisms versus 15 for the Plus Classic. The Super wipe also features a hexagonal-embossed, wood-fiber-blend material that is more cloth-like, absorbent, and pliable than the Plus Classic wipe. Choose Sanicloth Super when a higher-alcohol, broader-spectrum disinfectant is required by your facility's infection control protocol or when disinfecting complex equipment surfaces with crevices and hard corners.
What surfaces can Sanicloth Super wipes be used on?
These wipes are designed for use on hard, non-porous environmental surfaces in healthcare settings, including medical equipment housings, exam tables, countertops, bed rails, and other clinical surfaces. Always follow the product label instructions for contact time and surface compatibility. Do not use on mucous membranes, skin, or porous surfaces.
What is the required contact time for disinfection?
Refer to the product label for the specific contact time required to achieve disinfection against each listed microorganism. The surface must remain visibly wet for the full contact time to ensure effective disinfection. If the surface dries before the contact time is reached, apply an additional wipe.
How should the tub be stored to maintain shelf life?
Store the tub with the lid tightly closed in a cool, dry location away from direct sunlight and heat. The 2-year shelf life is measured from the date of manufacture printed on the product label. Discard any wipes that appear dry, discolored, or have an unusual odor, as these may indicate compromised product integrity.